this time I will share information for those of you who have problems on the home air conditioning unit.
the use of air conditioning has now become a necessity for now. air conditioning / AC is indeed very helpful in reducing the temperature of the room so that it makes comfort for each user, especially when the temperature outside is hot again and even drinking ice does not make it fresh 😄 hehehe ...
 |
| air conditioner sharp error code f0 |
things that make users sometimes upset, dizzy when the air conditioner that you want to use arrives "damaged when you want it turned on as
1. suddenly the air conditioner isn't cold
2. AC turns itself off
3. AC dripping water
4. AC totally dead
5. AC blinking
SHARP F0 AC ERROR CODE
Based on experience in the field when handling AC the latest type of sharp using R32 freon
sometimes reports of complaints from the customer ac are not cold and turn off and then the F0 code appears on the indoor display unit.
so I try to share information about why the code appears and how to fix it
see the explanation
F0 code appears because the thermistor coil does not detect cold and the pcb protects it so that the unit appears code f0
the thing to do is
1. Try removing the power jack / lowering the electric MCB for 5 minutes then turning on the AC
unit again
2. If the F0 code re-appears, turn it off again and turn it on again then check outdoor
3. Check the freon pressure and compressor ampere on the outdoor
for normal R32 freon pressure around 150 psi and ampere according to nameplate in outdoor
if less pressure can be added but if the freon pressure is below 60 psi it is likely
there was a leak of freon
4. look for leaks and immediately refill the freon, don't forget to vacuum before filling the freon
because for types of freon R32 and R410 each unit must be vacuumed so that the engine becomes
durable and cooling to maximum
I made this article
may be useful
cold greetings
AC service
